Use este identificador para citar ou linkar para este item:
https://repositorio.ufu.br/handle/123456789/19516| Tipo do documento: | Trabalho de Conclusão de Curso |
| Tipo de acesso: | Acesso Aberto |
| Título: | Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements |
| Título(s) alternativo(s): | Análise comparativa de mensurações utilizando microscópio óptico, microscópio eletrônico de varredura e microtomografia computadorizada |
| Autor(es): | Oliveira, Murilo Navarro |
| Primeiro orientador: | Prado, Célio Jesus do |
| Primeiro coorientador: | Karam, Frederick Khalil |
| Primeiro membro da banca: | Oliveira, Andréa Gomes |
| Segundo membro da banca: | Menezes, Murilo Souza |
| Resumo: | Microscopic measurements are widely used in scientific research and the correct equipment to realize these evaluations could be critical to determine the study results. Regarding microscopic measurements, three of the most used methods are: Optical Microscopy (OM), Scanning Electron Microscopy (SEM.), and Micro-computed Tomography (MCT). It is important to select which is the best method for assessing diverse parameters, considering the operational characteristics of the method, the equipment efficiency, and the machinery cost. Therefore, the main objective of this study was to define which is the most useful measurement method for assessing magnitudes below 0.55mm. Ten dental implants, with known dimensions as defined by the manufacturer were randomly distributed. Two blinded observers assessed the distance between the second and the third screw vortex of the implants using the three suggested methods. The true distance was defined to be 0.6mm. The assessed distances were. 0.597±0.007 for OM, 0.578±0.017 for SEM, and 0.613±0.006 for MCT. The assessed distances were significantly different when the methods were compared (P>0.01). Despite these differences, all measurements were between the CAD system tolerance, defined to be within 0.05mm. It was possible to conclude that linear measurements below 0.55mm can be performed by any of the described methods. |
| Palavras-chave: | Measurements Dental Implants Optical Microscope Micro-CT Electron Microscope |
| Área(s) do CNPq: | CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
| Idioma: | eng |
| País: | Brasil |
| Editora: | Universidade Federal de Uberlândia |
| Referência: | OLIVEIRA, Murilo Navarro. Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements. 2017. 17 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2017 |
| URI: | https://repositorio.ufu.br/handle/123456789/19516 |
| Data de defesa: | 5-Jul-2017 |
| Aparece nas coleções: | TCC - Odontologia |
Arquivos associados a este item:
| Arquivo | Descrição | Tamanho | Formato | |
|---|---|---|---|---|
| ComparativeAnalysisOptical.pdf | TCC | 2.38 MB | Adobe PDF |  Visualizar/Abrir |
Os itens no repositório estão protegidos por copyright, com todos os direitos reservados, salvo quando é indicado o contrário.