Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.ufu.br/handle/123456789/19516
Tipo de documento: Trabalho de Conclusão de Curso
Tipo de acceso: Acesso Aberto
Título: Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements
Título (s) alternativo (s): Análise comparativa de mensurações utilizando microscópio óptico, microscópio eletrônico de varredura e microtomografia computadorizada
Autor: Oliveira, Murilo Navarro
Primer orientador: Prado, Célio Jesus do
Primer coorientador: Karam, Frederick Khalil
Primer miembro de la banca: Oliveira, Andréa Gomes
Segundo miembro de la banca: Menezes, Murilo Souza
Resumen: Microscopic measurements are widely used in scientific research and the correct equipment to realize these evaluations could be critical to determine the study results. Regarding microscopic measurements, three of the most used methods are: Optical Microscopy (OM), Scanning Electron Microscopy (SEM.), and Micro-computed Tomography (MCT). It is important to select which is the best method for assessing diverse parameters, considering the operational characteristics of the method, the equipment efficiency, and the machinery cost. Therefore, the main objective of this study was to define which is the most useful measurement method for assessing magnitudes below 0.55mm. Ten dental implants, with known dimensions as defined by the manufacturer were randomly distributed. Two blinded observers assessed the distance between the second and the third screw vortex of the implants using the three suggested methods. The true distance was defined to be 0.6mm. The assessed distances were. 0.597±0.007 for OM, 0.578±0.017 for SEM, and 0.613±0.006 for MCT. The assessed distances were significantly different when the methods were compared (P>0.01). Despite these differences, all measurements were between the CAD system tolerance, defined to be within 0.05mm. It was possible to conclude that linear measurements below 0.55mm can be performed by any of the described methods.
Palabras clave: Measurements
Dental Implants
Optical Microscope
Micro-CT
Electron Microscope
Área (s) del CNPq: CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS
Idioma: eng
País: Brasil
Editora: Universidade Federal de Uberlândia
Cita: OLIVEIRA, Murilo Navarro. Comparative analysis of optical microscopy, scanning electron microscopy and micro-computed tomography on measurements. 2017. 17 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2017
URI: https://repositorio.ufu.br/handle/123456789/19516
Fecha de defensa: 5-jul-2017
Aparece en las colecciones:TCC - Odontologia

Ficheros en este ítem:
Fichero Descripción TamañoFormato 
ComparativeAnalysisOptical.pdfTCC2.38 MBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.