1. Repositório Institucional - Universidade Federal de Uberlândia
2. Faculdade de Engenharia Mecânica (FEMEC)
3. TCC - Engenharia Aeronáutica

Tipo do documento:	Trabalho de Conclusão de Curso
Tipo de acesso:	Acesso Aberto
Título:	Numerical Simulations of High-lift Configurations on a NACA4412 Airfoil
Autor(es):	Castro, Thiago Rezende de
Primeiro orientador:	Almeida, Odenir de
Primeiro membro da banca:	Alemida, Odenir de
Segundo membro da banca:	Andrade, João Rodrigo
Terceiro membro da banca:	Miranda, Luiz Paulo Borges
Resumo:	This work addresses the numerical simulation of high-lift systems in the aeronautical industry. The main objective was to evaluate the performance of different configurations of such high-lift devices, identifying their advantages and disadvantages. The secondary objective was to develop a robust numerical method for simulating flows around airfoils, using the OpenFOAM software. Numerical analyses were carried out on five different configurations — namely, the plain flap, split flap, slotted flap, Fowler flap and Junkers flap — under similar conditions, allowing for a consistent comparison of outcomes. All flaps were deflected by 10◦ and analyzed at a Reynolds of 1.7 · 105 over a range of angles of attack between −4 ◦ and 16◦ . The Spallart-Almarras turbulence model was used in all simulations, which were carried out in the steady state. Quantitative results were analyzed for the coefficients of lift (Cl ) and drag (Cd ) per unit length and the coefficient of pressure (Cp) on the surfaces of the airfoils analyzed, as well as the velocity and pressure fields of the flows. To check the quality of the simulation, the method was used to replicate experimental and numerical results obtained by other authors for the flow around airfoils (flapped or not). In addition, the convergence of the simulation between successively refined meshes and the quality of the boundary layer modeling from the dimensionless parameter y + were analyzed, and both obtained good results with residual errors in the order of 10−5 . The results obtained show the efficiency and robustness of the proposed method and its applicability in different scenarios. It was found that the simulations presented reliable and coherent results for lift and drag generation, but for angles of attack close to stall, convergence was more difficult. In addition, it was possible to identify the superiority in lift generation of the flap configurations most commonly used in the aeronautical industry, such as the slotted flap and the Fowler flap.
Palavras-chave:	Numerical simulation; OpenFOAM; High-lift devices; Flaps.
Área(s) do CNPq:	CNPQ::ENGENHARIAS::ENGENHARIA AEROESPACIAL::AERODINAMICA CNPQ::ENGENHARIAS::ENGENHARIA AEROESPACIAL::SISTEMAS AEROESPACIAIS::AVIOES
Idioma:	eng
País:	Brasil
Editora:	Universidade Federal de Uberlândia
Referência:	CASTRO, Thiago Rezende de. Numerical Simulations of High-lift Configurations on a NACA4412 Airfoil. 2024. 63 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Aeronáutica) – Universidade Federal de Uberlândia, Uberlândia, 2024.
URI:	https://repositorio.ufu.br/handle/123456789/43783
Data de defesa:	16-Ago-2024
Aparece nas coleções:	TCC - Engenharia Aeronáutica

Este item está licenciada sob uma Licença Creative Commons