Por favor, use este identificador para citar o enlazar este ítem:
https://repositorio.ufu.br/handle/123456789/30494| Tipo de documento: | Trabalho de Conclusão de Curso |
| Tipo de acceso: | Acesso Aberto |
| Fecha de embargo: | 2022-11-09 |
| Título: | Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. |
| Autor: | Allig, Gabriela Resende |
| Primer orientador: | Simamoto Júnior, Paulo Cézar |
| Primer coorientador: | Cardoso, Igor Oliveiros |
| Primer miembro de la banca: | Zeola, Lívia Favaro |
| Segundo miembro de la banca: | Santos Filho, Paulo César de Freitas |
| Resumen: | The aim of this study was to evaluate different Light Cure Unit (LCU) and polishing protocols on surface roughness and gloss of a composite resin. Roughness and gloss of samples (n=8) of nanohybrid composite resin (E1, VOCO Cuxhaven, Hamburg, Germany) were evaluated and lightcured with different light-emitting diode (LED) devices: Valo (Ultradent, Salt Lake City, Utah, USA), Valo Grand (Ultradent, Salt Lake City, Utah, USA), Bluephase 20i (Ivoclar, Schaan, Liechtenstein), Elipar DeepCure-L (3M ESPE, St Paul, MN, USA), Emitter D (Schuster, Hyannis, MA, USA) and Radii Xpert (SDI Bayswater, Survey, Australia); and polished with three different systems: Sof-Lex Diamond Polishing System (3M ESPE, St Paul, MN, USA), Jiffy Original Composite System (Ultradent, Salt Lake City, Utah, USA) and Opti1Step (Kerr, Orange, CA, USA). There was no difference for the different LEDs for roughness (P=0.935) and gloss (P=0.012). For the superficial roughness test Sof-Lex and Opti1Step were similar between themselves and significantly superior to Jiffy. For the gloss test Sof-Lex and Opti1Step presented superior results than Jiffy. The LCU did not influence the roughness and gloss of the composite resin, while the polishing protocol showed influence on the result. |
| Palabras clave: | Composite resin Finishing and polishing Light emitted diode Light cure unit |
| Área (s) del CNPq: | CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
| Idioma: | eng |
| País: | Brasil |
| Editora: | Universidade Federal de Uberlândia |
| Cita: | ALLIG, Gabriela Resende. Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. 2020. 20 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2020. |
| URI: | https://repositorio.ufu.br/handle/123456789/30494 |
| Fecha de defensa: | 9-nov-2020 |
| Aparece en las colecciones: | TCC - Odontologia |
Ficheros en este ítem:
| Fichero | Descripción | Tamaño | Formato | |
|---|---|---|---|---|
| InfluenceFinishingPolishing .pdf | TCC | 315.17 kB | Adobe PDF |  Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons
