Por favor, use este identificador para citar o enlazar este ítem:
https://repositorio.ufu.br/handle/123456789/46646| Tipo de documento: | Trabalho de Conclusão de Curso |
| Tipo de acceso: | Acesso Embargado |
| Título: | Efeito da transmissão de luz através de cerâmicas de dissilicato de lítio CAD/CAM de diferentes translucidez com diferentes espessuras |
| Autor: | Comin, Luís Felipe |
| Primer orientador: | Soares, Carlos José |
| Primer miembro de la banca: | Soares, Priscilla Barbosa |
| Segundo miembro de la banca: | Carlo, Hugo Lemes |
| Resumen: | This study evaluated the effect of the type, opacity and thickness of the CAD/CAM lithium disilicate ceramics on the radiant power (mW), spectral radiant flux (mW/nm), the attenuation coefficient (mm-1), when using different monowave and multiwave light curing units (LCUs). Five types of A2 CAD/CAM lithium disilicate ceramic were used (n = 3): DissiliKota (Kota Imports), IPS e-max CAD (Ivoclar Vivadent), Mazic Claro CAD (Vericom), Rosetta SM (OdontoMega), and T-Lithium (Talmax); in two translucencies: high (HT) and low translucency (LT) were tested for light transmission when using three LCUs: Elipar DeepCure–L (Solventum), Quazar (FGM) and VALO Grand (Ultradent). The power (mW) and spectral radiant power (mW/nm) were measured using a fiber optic spectrometer and integrating sphere with or without the 4 different thicknesses (0.5, 1.0, 1.5, 2.0 mm) of the CAD lithium disilicate ceramics. The attenuation coefficient was measured. Data of power light were subjected to 3-way ANOVA and Tukey HSD test, percentage of light transmitted was analyzed by exponential regression (R²) (α = 0.05). Light transmission through CAD/CAM lithium disilicate ceramics was significantly influenced by the type (p<0.001), and translucency (p<0.001). LT ceramics transmitted significantly lower light than HT (p<0.001). Attenuation coefficients varied among LCUs and ceramic types, with higher values in the violet spectrum. The thickness affected significantly the percentage of light transmitted R²>0.90. CAD/CAM Lithium disilicate ceramic type, translucency, and thickness significantly affected the light transmission. As the ceramic thickness increased, there was a logarithmic decrease in light transmission, irrespective of the tested CAD/CAM lithium disilicate ceramic. Violet light was more attenuated than blue light for multiwave LCUs. Elipar DeepCure–L, Quazar, and VALO Grand exhibited similar light transmitted through all tested ceramics. |
| Palabras clave: | Cerâmicas Ceramics Lítio Lithium Luz Light |
| Área (s) del CNPq: | CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
| Idioma: | eng |
| País: | Brasil |
| Editora: | Universidade Federal de Uberlândia |
| Cita: | COMIN, Luís Felipe Prearo. Efeito da transmissão de luz através de cerâmicas de dissilicato de lítio CAD/CAM de diferentes translucidez com diferentes espessuras. 2025. 32 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) – Universidade Federal de Uberlândia, Uberlândia, 2025. |
| URI: | https://repositorio.ufu.br/handle/123456789/46646 |
| Fecha de defensa: | 14-jun-2025 |
| Aparece en las colecciones: | TCC - Odontologia |
Ficheros en este ítem:
| Fichero | Descripción | Tamaño | Formato | |
|---|---|---|---|---|
| EfeitoTransmissãoLuz.pdf | TCC | 3.54 MB | Adobe PDF |  Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons
