1. Repositório Institucional - Universidade Federal de Uberlândia
2. Faculdade de Engenharia Mecânica (FEMEC)
3. TCC - Engenharia Aeronáutica

ORCID:	http://orcid.org/0000-0001-7219-376X
Tipo do documento:	Trabalho de Conclusão de Curso
Tipo de acesso:	Acesso Aberto
Título:	Abordagem baseada em ISHM para detecção de falha em uma máquina rotativa com eixo de material compósito
Autor(es):	Sousa, Marcela Andréa Teodoro
Primeiro orientador:	Cavalini Junior, Aldemir Aparecido
Resumo:	Composite shafts have been showing promising results when applied to rotating machines due to its low weight/strength ratio and good fatigue resistance. Despite the advantages in comparison to more traditional materials, composites present different types of damage that are difficult to detect. Therefore, it is necessary to use monitoring techniques to detect incipient damages and prevent failure. So, this work evaluates the structural health monitoring method based on electromechanical impedance (ISHM) applied in a rotating machine with a composite shaft. This methodology uses the piezoelectric transducers bonded to the host structure as sensor and actuator to detect damage by monitoring changes in its electric impedance. Usually, the evaluation of the impedance responses is performed by applying damage metrics, which allows the quantification of the influence of damage. This is possible since the sensor’s electrical impedance is directly related to the mechanical impedance of the structure. For this investigation, two sensors (each one with four piezoelectric patches connected in parallel) were attached to the composite shaft. To simulate the damage condition, a nut was attached in different positions on the shaft. Also, in order to increase the robustness of the ISHM technique, the effects of the rotation speed of the rotor and temperature variation were evaluated. Additionally, a data normalization based on a hybrid optimization method associated with a given damage metric is used to minimize these influences.
Palavras-chave:	Monitoramento de integridade estrutural Máquina rotativa Impedância eletromecânica Eixo de material compósito
Área(s) do CNPq:	CNPQ::ENGENHARIAS::ENGENHARIA MECANICA::MECANICA DOS SOLIDOS
Idioma:	eng
País:	Brasil
Editora:	Universidade Federal de Uberlândia
Referência:	SOUSA, Marcela Andréa Teodoro. Abordagem baseada em ISHM para detecção de falha em uma máquina rotativa com eixo de material compósito. 2019. 30 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Aeronáutica) - Universidade Federal de Uberlândia, Uberlândia, 2020.
URI:	https://repositorio.ufu.br/handle/123456789/28153
Data de defesa:	18-Dez-2019
Aparece nas coleções:	TCC - Engenharia Aeronáutica

Os itens no repositório estão protegidos por copyright, com todos os direitos reservados, salvo quando é indicado o contrário.